Home › Guides › Where to install home batteries

Where to install a home battery safely

Why location matters, PAS 63100 principles, places to avoid, better locations, garages and outbuildings, temperature and ventilation, power stations and DIY systems, installation and insurance, and detection.

By Michael Johnson · Updated 18 November 2026 · How we check our guides

Home batteries are a great way to store solar power and keep the lights on in a power cut, but a large lithium battery holds a lot of energy, and in the rare event of a fault it can catch fire or give off toxic, flammable gases very quickly. Where a battery is installed matters as much as which one you buy. In 2024, the British Standards Institution published PAS 63100, setting out fire-protection rules for battery storage in homes. This guide explains where home batteries should and shouldn't go, the PAS 63100 principles, garages and outbuildings, indoor installations, portable power stations and DIY systems, temperature, ventilation, and what to do if something goes wrong.

If a battery is smoking, hissing, bulging, or smells sweet or chemical: don't try to unplug or move it. Get everyone out, close doors behind you, and call 999. Lithium battery fires can reignite and release toxic gases.

1. Why location matters

2. PAS 63100: the key principles

PAS 63100:2024, "Electrical installations: protection against fire of battery energy storage systems for use in dwellings", applies to battery systems installed in homes in the UK. Installers working to it follow principles including:

The full document is published by BSI. A qualified installer will apply it; ask how your installation complies.

3. Places to avoid

Guidance based on PAS 63100 lists locations where batteries shouldn't be installed, including:

Also avoid places that get very hot (boiler cupboards, next to cylinders, south-facing glass) or very cold and damp.

4. Better locations

LocationProsWatch for
Integral or attached garageOutside living space, near the consumer unitKeep away from cars, fuel, flammable storage; consider fire separation from the house
Outdoor wall in a rated enclosureKeeps fire risk outsideAt least 1 m from doors, windows and vents; weather and temperature rating
Detached outbuilding or shedSeparation from the houseCable runs, frost, damp, security
Utility room (if unavoidable indoors)AccessibleNot in an escape route; fire detection; away from flammables

5. Garages, sheds and outbuildings

6. Temperature, damp and ventilation

7. Portable power stations and DIY systems

8. Installation, labelling and insurance

9. Detection and emergency plans

10. Frequently asked questions

Can I put a home battery in my loft?

Guidance based on PAS 63100 says not to install batteries in lofts, roof spaces or voids, where a fire could develop unseen.

Where is the best place for a home battery?

Outside the living space where possible: a garage, an outbuilding or a rated outdoor enclosure, away from doors, windows and flammable materials, with fire detection.

What is PAS 63100?

A BSI specification published in 2024 for protecting homes against fire from battery energy storage systems, covering where and how they should be installed.

Can I keep a power station in my bedroom?

It's best not to charge large power stations in bedrooms or escape routes, especially overnight. Charge them in a living area on a hard surface while you're awake.

11. Sources

  1. BSI, PAS 63100:2024 overview: bsigroup.com
  2. Self-Build, new fire safety standards introduced for domestic battery storage systems: self-build.co.uk
  3. Battery Design, PAS 63100:2024: batterydesign.net
  4. IET Engineering Communities, PAS 63100:2024 now available: theiet.org

New to some of the terms? See the glossary. Not sure where to start? Try start here.