Solar panel maintenance
How much maintenance panels need, dirt, moss and lichen, cleaning safely, snow and frost, birds and pests, checks after storms, monitoring output, inverters and wiring, off-grid panels, and a schedule.
By Michael Johnson · Updated 18 November 2026 · How we check our guides
Solar panels have no moving parts and need little attention, which is one of their great strengths. But a little maintenance keeps them producing what they should for 25 years or more: checking for dirt, moss, bird mess and shading, keeping an eye on the inverter, and inspecting cables and fixings after storms. For off-grid and backup systems, where every watt matters in winter, a dirty panel or a loose connection can make the difference between a full battery and a flat one. This guide covers cleaning safely, snow, birds and pests, storm checks, monitoring, inverters and wiring, and when to call a professional.
1. How much maintenance do panels need?
In the UK, rain keeps most roof panels reasonably clean. The Energy Saving Trust suggests checking them every 12–18 months and cleaning only if you can see dirt, with a professional inspection of panels, fixings and wiring every few years. Panels at a low tilt, near trees, farms or roads, or popular with birds, need more attention.
2. Dirt, moss and lichen
| Problem | Effect | Notes |
|---|---|---|
| Light dust and pollen | Small losses, a few % | Rain usually clears it on tilted panels |
| Bird droppings | Can shade whole cells | A single patch can cut a panel's output noticeably, as cells are wired in series |
| Dirt line along the bottom edge | Shades the bottom row of cells | Common on shallow-angle panels where water pools at the frame |
| Moss and lichen | Shading; can trap moisture | Grows on panels near trees or in damp, shady spots |
| Leaves | Shading | Also block gutters and roof drainage |
Shading even part of a panel can reduce output by much more than the shaded area suggests, because cells in series are limited by the weakest. See the solar panel output calculator.
3. How to clean panels safely
- Clean on a cool, overcast day or early morning: water evaporates quickly off hot panels and leaves streaks, and cold water on hot glass can stress it.
- Turn the system off following the maker's instructions.
- Work from the ground with an extending pole and a soft brush or sponge.
- Use plain water, ideally rainwater or deionised water to avoid limescale marks. Avoid washing-up liquid, which leaves residue, and harsh chemicals.
- Don't use pressure washers, which can damage seals and the anti-reflective coating.
- Don't scrape or use abrasive pads.
- For roofs you can't reach safely, use a professional cleaner; it typically costs about £60–£100 for a normal house.
4. Snow and frost
- Snow on panels stops production completely, but on a tilted panel it usually slides off once the sun hits it, often faster than the rest of the roof.
- Don't climb up to clear roof panels. Snow sliding off in one go can injure people below and damage gutters.
- Ground-mounted and portable panels can be cleared gently with a soft brush or snow rake with a rubber edge; never use a metal shovel, scraper or hot water.
- Frost clears quickly in sunshine; leave it.
- Cold, bright days are actually good for solar: panels are more efficient when cold. See the solar panel temperature calculator and the winter solar guide.
5. Birds and pests
- Pigeons often nest under roof panels: the noise, mess and debris can damage cables and block gutters.
- Bird-proofing mesh fitted around the edges of the array stops them getting underneath. It's a job for a solar installer or pest controller.
- Birds' nests are protected while in use under the Wildlife and Countryside Act, so proofing is best done outside nesting season, or by a professional.
- Squirrels and rodents can chew cables, especially on ground-mounted and shed arrays. Use conduit or cable protection.
6. After storms
- From the ground (binoculars help), look for cracked glass, panels lifted or loose, damaged mounting rails, and hanging cables.
- Check output: a sudden drop suggests damage or a fault.
- Don't touch damaged panels or cables: they can be live in daylight. Isolate the system if safe and call the installer.
- Tell your insurer about damage. See the storm-proofing guide and the lightning and surge protection guide.
7. Monitoring output
- Most inverters and charge controllers have an app or display showing daily generation. Check it regularly, especially when the weather is similar to a previous good day.
- Compare month by month with last year, or with an online estimate for your area.
- A gradual drop of about 0.5% a year is normal ageing; a sudden drop means a problem.
- If one string produces less than another identical one, look for shading, dirt or a fault.
- Use the solar panel output calculator to see what to expect.
8. Inverters, controllers and wiring
- Inverters typically need replacing every 10–15 years; budget for it.
- Keep inverters and controllers clean, dry and ventilated. Clear dust from vents and don't block them.
- Look for error codes and warning lights.
- Check visible cables for UV damage, chafing and loose or corroded MC4 connectors.
- Have a full professional inspection every few years; some warranties require it.
- See the fault finding guide and the charge controller guide.
9. Off-grid and portable panels
- Ground-mounted panels are easy to clean and adjust; change the tilt angle seasonally to boost winter output. See the tilt angle calculator.
- Keep vegetation trimmed so it doesn't shade the bottom of the panels in summer.
- Folding portable panels: keep them clean and dry, store flat or loosely folded, protect connectors, and don't leave them out in storms.
- Check fuses and connections between panels and controller each season.
10. A maintenance schedule
| How often | Task |
|---|---|
| Monthly | Glance at generation figures; check for warnings |
| Seasonally | Look at panels from the ground; clear leaves from gutters; adjust tilt on ground mounts |
| Every 12–18 months | Clean if visibly dirty |
| After storms | Check from the ground and check output |
| Every 3–5 years | Professional inspection of panels, fixings, wiring and inverter |
| 10–15 years | Expect to replace the inverter |
11. Frequently asked questions
Do solar panels need cleaning in the UK?
Often not much, as rain keeps tilted panels fairly clean. Check every 12–18 months and clean if dirty, especially for bird droppings or moss.
Should I clear snow off my solar panels?
Not from a roof. It usually slides off once the sun hits it. Ground-mounted panels can be brushed gently with a soft brush.
Can I use a pressure washer on solar panels?
No. High pressure can damage seals, coatings and wiring. Use a soft brush and plain water.
How long do solar inverters last?
Typically 10–15 years, while panels usually last 25 years or more.
12. Sources
- Energy Saving Trust, solar panel cleaning and maintenance: energysavingtrust.org.uk
- Homebuilding & Renovating, how to clean solar panels: homebuilding.co.uk
- Sunsave, do solar panels need cleaning?: sunsave.energy
New to some of the terms? See the glossary. Not sure where to start? Try start here.