Smart homes in a power cut
What works in a power cut, keeping the router running, local vs cloud control, locks and gates, heating, when power comes back, off-grid automation, and security.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
Smart homes are convenient until the power or internet goes off. Then the smart thermostat, the voice assistant, Wi-Fi cameras, app-controlled locks and smart lights may stop working, or behave unexpectedly when power returns. This guide explains what keeps working and what doesn't in a power cut, keeping the router alive, local control versus cloud services, locks and doors, what happens when power comes back, using automation to manage power in off-grid homes, and security.
1. What works in a power cut
| Device | In a power cut |
|---|---|
| Wi-Fi router and hubs | Off unless on a UPS or battery |
| Smart speakers and displays | Off (most have no battery) |
| Battery smart locks | Usually still lock and unlock by keypad or key; app and remote access need the router and internet |
| Battery video doorbells and cameras | Record locally if they have storage; no alerts without broadband |
| Smart thermostats | The boiler won't run anyway without power |
| Smart lights and plugs | Off |
| Battery sensors (door, leak, smoke) | May sense, but can't alert you without the hub and internet |
| Digital (VoIP) landline | Off unless the router has battery backup. See the digital landline guide |
2. Keeping the router running
- A small UPS or a router battery backup keeps broadband and Wi-Fi running for hours; routers typically use about 10–20 W.
- Full-fibre lines also need the fibre box (ONT) powered; put it on the same backup.
- Broadband may still fail if the street cabinet or exchange loses power, but mobile data is often a backup. See the mobile internet guide.
- Some providers offer battery backup units for vulnerable customers, especially those relying on a digital landline.
- See the UPS guide and the UPS runtime calculator.
3. Local control vs the cloud
- Cloud-only devices stop responding when the internet or the maker's service is down, even if your power is on.
- Systems with local control (for example a local hub running Zigbee, Z-Wave or Matter, or a home server running open-source home automation) keep working on your home network.
- A low-power hub or small computer on a UPS can run your automations through a power cut.
- Keep physical switches working: avoid setups where lights can only be controlled from an app.
4. Locks, doors and gates
- Keep a physical key or a keypad code for every smart lock, and replace lock batteries when warned.
- Know how to open electric gates and garage doors manually. See the gates and garage doors guide.
- Make sure fire escape routes never depend on a powered lock.
5. Heating and hot water
- Gas and oil boilers and heat pumps need electricity for pumps, fans and controls, smart or not. See the gas off guide and the heat pump guide.
- After a power cut, check the thermostat has reconnected and its schedule is correct.
- Smart radiator valves usually default to a safe open or set position when they lose their hub.
6. When the power comes back
- Smart plugs and bulbs have a "power-on behaviour" setting: on, off, or previous state. Decide what you want, especially for heaters and appliances that shouldn't start unattended.
- Everything switching on at once can trip breakers; staggered start-up is safer.
- Check automations, schedules, clocks and cameras afterwards.
- See the power cut guide.
7. Automation for off-grid power
- Automations can switch loads on when solar is strong or the battery is full (water heating, dehumidifiers, charging) and off when it's low.
- Use relays and contactors rated for the load; a cheap smart plug shouldn't switch a heater at its full 13 A rating for hours.
- Many inverters and battery systems expose data locally for this. See the energy monitoring guide and the diverter guide.
- Smart devices draw standby power; count them. See the standby loads guide.
8. Security
- Change default passwords, use strong unique passwords and two-factor login on accounts.
- Keep firmware updated, and replace devices that no longer get security updates.
- Put smart devices on a separate guest or IoT network where your router allows it.
- See the cyber attack preparedness guide.
9. Frequently asked questions
Will my smart lock work in a power cut?
Most battery-powered smart locks still work by keypad, fingerprint or key, but app and remote control need the router and internet.
How do I keep Wi-Fi on in a power cut?
Put the router (and fibre box, if you have one) on a small UPS or battery backup. Broadband may still drop if local network equipment loses power.
Why did my heater come on after a power cut?
Some smart plugs restore their previous state when power returns. Set the power-on behaviour to "off" for appliances that shouldn't restart unattended.
10. Sources
- Ofcom, staying connected in severe weather: ofcom.org.uk
- ISPreview, battery backup for fibre broadband and VoIP phones: ispreview.co.uk
- Vodafone UK, broadband battery backup press release: vodafone.co.uk
New to some of the terms? See the glossary. Not sure where to start? Try start here.