Home energy monitoring
Why monitor, options compared, smart meters and in-home displays, CT clamp monitors, plug-in monitors and smart plugs, finding your baseload, using the data to size a system, and monitoring batteries and solar.
By Michael Johnson · Updated 18 November 2026 · How we check our guides
You can't manage what you can't measure. Knowing how much electricity your home uses, when, and which appliances use it, is the first step to cutting bills, sizing a battery or solar system properly, and planning for a power cut. Monitoring ranges from reading your meter and using the smart meter display to fitting clamp-on monitors, smart plugs and battery monitors. This guide covers the options, what to measure, how to find "phantom" loads, using the data to size backup and off-grid systems, and monitoring battery and solar systems.
1. Why monitor?
- Spot waste: appliances left on standby, old fridges and freezers, dehumidifiers and electric heating.
- Size batteries, inverters and generators from real data, not guesswork.
- Time loads to use solar or cheap-rate electricity.
- Check whether solar and batteries are performing.
2. Monitoring options compared
| Option | Measures | Pros | Cons |
|---|---|---|---|
| Reading the meter | Whole home, over time | Free | Manual |
| Smart meter in-home display | Whole home, live and daily | Usually free with a smart meter | Limited history and detail |
| Consumer access device (CAD) linked to the smart meter | Whole home, to an app | Detailed history | Small cost |
| CT clamp monitor | Whole home or individual circuits | Works without a smart meter; can monitor solar | Installation in the consumer unit area |
| Plug-in monitor or smart plug | One appliance | Cheap, exact | Plug-in loads only, up to 13 A |
| Battery monitor with shunt | DC system in and out | Accurate state of charge | DC systems only |
3. Smart meters and in-home displays
- In Great Britain, smart meters send readings to your supplier automatically and come with an in-home display showing live use and cost.
- Many suppliers' apps show half-hourly data.
- The display runs on mains power, so it won't work in a power cut unless it has a battery.
4. Clamp (CT) monitors
- A current transformer (CT) clamps around a cable and measures the current flowing through it, without cutting into the cable.
- Clamped on the meter tails, it measures whole-house use; extra clamps can monitor solar, battery or individual circuits.
- Most simple monitors assume a fixed voltage; better ones also measure voltage for more accurate readings.
- Fitting clamps near the meter tails and consumer unit involves live parts: if you're not competent, have an electrician fit them.
5. Plug-in monitors and smart plugs
- Plug the appliance into the monitor for at least 24 hours (a week for fridges and freezers) to get a realistic daily figure.
- Smart plugs can switch loads on timers or when solar is available.
- Check the plug's rating before using it with heaters or other high loads.
- Compare results with the appliance wattage chart.
6. Finding your baseload
- Baseload is the power used all the time: fridges, freezers, routers, standby devices, alarms, pumps.
- Check the live reading late at night with everything you'd normally leave on.
- Switch off circuits one at a time at the consumer unit (keeping the fridge and freezer on) to find what's using power.
- Each continuous watt costs about 8.8 kWh a year. Work out costs with the electricity cost calculator.
7. Using the data to size a system
- Daily kWh tells you battery size for backup or off-grid use. See the home backup battery calculator.
- Peak power tells you inverter size. See the inverter size calculator.
- Winter use against winter solar tells you whether off-grid is realistic. See the off-grid solar system calculator.
- For a power cut, monitor the essential circuits only. See the essential loads guide.
8. Monitoring battery and solar systems
- A shunt-based battery monitor counts amp-hours in and out for an accurate state of charge. See the battery monitoring guide.
- Charge controllers and inverters often have apps or displays showing daily solar yield and load.
- Keep a simple log of solar yield each month to spot faults and plan for winter.
9. Frequently asked questions
How do I find out what's using electricity in my home?
Watch the smart meter display or a clamp monitor while switching things off, and use a plug-in monitor on individual appliances.
What is a CT clamp energy monitor?
A sensor that clamps around a cable to measure current without cutting it, sending readings to a display or app.
What is a normal baseload?
It varies widely; many homes use from under 100 W to a few hundred watts continuously, mostly fridges, freezers and standby devices.
10. Sources
- GOV.UK, smart meters: how they work: gov.uk
- Energy Saving Trust, guide to smart meters: energysavingtrust.org.uk
- Voltaware, sensors and technology: voltaware.com
New to some of the terms? See the glossary. Not sure where to start? Try start here.