Hand pumps for wells and boreholes
Why depth matters, shallow-well pitcher pumps, deep-well hand pumps, well bailers, running the electric pump on backup power, water quality, installation, and maintenance.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
Homes on private wells and boreholes usually rely on an electric pump, so a power cut means no water, unless you have a backup. A hand pump, or a way to run the electric pump from backup power, keeps water flowing. This guide explains why suction pumps are limited to shallow water, shallow-well pitcher pumps, deep-well hand pumps that can share a borehole with an electric pump, bucket-type well bailers, running the electric pump from a generator or battery, water quality and treatment, installation, and maintenance.
1. Why depth matters
- A suction pump works by lowering pressure in the pipe, so atmospheric pressure pushes water up. At sea level, the theoretical maximum is about 10 metres; in practice, about 6–7 metres.
- Water level below that needs a pump that pushes water up from below: a submersible or a down-hole piston pump.
- Know your well's static water level and how far it drops when pumping.
2. Shallow wells: pitcher pumps
- Pitcher pumps are simple, cheap cast-iron hand pumps for water within about 7 metres of the surface.
- They usually need priming with a little water; a foot valve at the bottom of the pipe holds the prime.
- Good for garden wells, ponds and shallow springs.
- Drain them in frost or they can crack.
3. Deep wells: down-hole hand pumps
- Deep-well hand pumps have a cylinder and piston down in the water, worked by a rod from a handle at the top; they can lift from tens of metres.
- Some are designed to fit alongside an existing submersible pump in the same borehole, if the casing is wide enough.
- Pumping by hand from depth takes effort; long-lever handles help.
- Get a borehole contractor's advice on fitting.
4. Well bailers
- A well bailer is a narrow tube with a one-way valve at the bottom, lowered on a rope into a borehole to bring up a litre or two at a time.
- Slow, but cheap and simple for emergencies.
- Check it fits past the pump and cables, and use clean rope to avoid contaminating the water.
5. Running the electric pump on backup power
- Borehole pumps have high starting currents; size a generator or inverter for the surge. See the water pump calculator and the generator size calculator.
- Pumps with soft-start or variable speed drives are easier to run from inverters. See the soft starter guide.
- Pump into a storage tank when power is available, then supply the house by gravity. See the gravity water guide.
- Connections to house wiring need a proper changeover. See the transfer switch guide.
- Solar pumping is another option. See the solar pumping guide.
6. Water quality
- Private supplies should be tested regularly; floods and heavy rain can contaminate wells.
- If water looks, smells or tastes different after flooding, boil it or use bottled water until tested.
- Treatment such as UV disinfection needs power; boiling or filtration may be needed in a power cut. See the private water supply guide and the water filters guide.
7. Installation
- Seal the wellhead to keep out surface water, animals and debris.
- Use food-grade pipe and fittings.
- Abstraction over 20 cubic metres a day in England usually needs a licence; household hand pumping is far below that.
- Get professional advice for boreholes, which are easy to damage.
8. Maintenance
- Work the pump regularly, and replace leathers and seals as needed.
- Protect from frost.
- Keep spare seals, a foot valve and priming water.
9. Frequently asked questions
How deep can a hand pump lift water?
Suction (pitcher) pumps manage about 6–7 metres. Deep-well hand pumps with the cylinder down in the water can lift from tens of metres.
Can I fit a hand pump in my borehole with an electric pump?
Sometimes, if the casing is wide enough. Ask a borehole contractor.
How do I get well water in a power cut?
Use a hand pump or bailer, run the electric pump from a correctly sized generator or inverter, or store water in a tank when power is available.
10. Sources
- Total Prepare, everything you need to know about hand pumps for wells: totalprepare.ca
- Boshart, the world of hand pumps: boshart.com
- Countryside, installing a backup hand pump: iamcountryside.com
- GOV.UK, check if you need a licence to abstract water: gov.uk
New to some of the terms? See the glossary. Not sure where to start? Try start here.