Off-grid water: rainwater, pumps, treatment and the rules
How to collect, store, pump and treat water for a cabin, van or off-grid home: how much you need, rainwater harvesting, tanks, filtration and UV disinfection, pumps and their power use, freeze protection, greywater, emergency water at home, and the rules in the UK, USA and Australia, including US rainwater limits.
By Michael Johnson · Updated 16 November 2026 · How we check our guides
Water is the one thing you can't go without for more than a few days, and an off-grid property, a van or a home in a long outage needs its own supply. This guide covers collecting rainwater, sizing tanks, pumps and pressure, filtering and disinfecting water to drink, keeping pipes from freezing, and the rules in the UK, USA and Australia.
1. How much water you need
| Use | Typical per person per day |
|---|---|
| Drinking only (survival) | 3 litres (UK guidance) to 1 US gallon / 3.8 L (Ready.gov); more in heat |
| Drinking, cooking and basic washing | 10–20 L |
| Careful off-grid living (short showers, low-flush toilet) | 40–80 L |
| Typical mains-connected home | UK about 140 L; US about 300 L (80 gal); Australia about 150–200 L |
Size your storage with the water tank calculator.
2. Sources: rain, wells, springs and surface water
| Source | Pros | Risks |
|---|---|---|
| Rainwater from a roof | Soft, free, usually low in chemicals | Bird and animal droppings, dust, leaves; lead from old roofs and flashings; unreliable in dry spells |
| Bore or well (groundwater) | Reliable, often good quality | Nitrates, arsenic, iron, manganese, bacteria from septic tanks or livestock; needs a pump |
| Spring | Can flow by gravity | Surface contamination after rain; must be protected at the source |
| Stream, river, lake or dam | Large volumes | Always contaminated with microbes; possible farm and industrial chemicals; algal toxins in warm weather |
3. Rainwater harvesting
Litres collected ≈ roof area (m²) × rainfall (mm) × 0.8
(US: gallons ≈ roof area (ft²) × rainfall (inches) × 0.62 × 0.8)
- A 50 m² roof in a UK area with 800 mm of rain a year collects about 32,000 L a year, roughly 88 L a day on average, but very unevenly through the year. Run your own numbers with the rainwater harvesting calculator.
- Roof materials: metal (Colorbond, galvalume), glazed tiles and slate are good. Avoid collecting drinking water from roofs with uncoated lead flashing, lead-based paint, treated timber, bitumen products or fresh coatings.
- Gutter guards and leaf diverters keep most debris out.
- First-flush diverter: dumps the dirtiest first runoff from each storm. Australian health guidance suggests diverting the first 20–25 L for an average roof. It must empty between storms to work.
- Insect screens (1 mm mesh or finer) on every inlet and overflow keep mosquitoes out.
- Calmed inlet and floating extraction: water enters at the bottom without stirring up sediment and is drawn from just below the surface, where it's cleanest.
4. Tanks: size, material and placement
- Size for the longest dry spell you expect: daily use × dry days, plus a margin. Many rural Australian homes on rainwater alone have 50,000–100,000 L.
- Material: food-grade polyethylene, concrete, steel with a food-grade liner, or fibreglass. Drinking-water tanks should meet AS/NZS 4766 or AS 2070 (Australia), NSF/ANSI 61 (US) or WRAS approval (UK).
- Opaque and sealed: light grows algae; open tanks let in animals and insects.
- Placement: on a level, compacted base able to take the weight (1,000 L weighs a tonne). Height gives free pressure: every 10 m of height gives about 1 bar (14.5 psi).
- Safety: lockable lids to keep children out; underground tanks are confined spaces, never enter one alone.
5. Treating water to drink
| Method | Removes | Doesn't remove | Notes |
|---|---|---|---|
| Boiling | Bacteria, viruses, protozoa | Chemicals, lead, sediment | Bring to a rolling boil. US CDC: boil for 1 minute (3 minutes above 2,000 m / 6,500 ft). An automatic kettle reaching the boil is enough by Australian guidance |
| Sediment filter (5–50 µm) | Dirt, rust, particles | Microbes, dissolved chemicals | Protects later stages; replace when pressure drops |
| Activated carbon | Taste, odour, chlorine, many organic chemicals | Most microbes, nitrates, salts | Certified to NSF/ANSI 42 (taste) or 53 (health effects) |
| Ultraviolet (UV) | Bacteria, viruses, protozoa | Chemicals; anything shaded by cloudy water | Needs clear water and power (about 20–50 W). NSF/ANSI 55 Class A for drinking; replace the lamp yearly |
| Ceramic or hollow-fibre filters (0.1–0.2 µm) | Bacteria, protozoa | Most viruses, chemicals | Good gravity or portable option; look for NSF/ANSI P231 or similar for purifiers |
| Reverse osmosis | Most chemicals, salts, lead, nitrates, microbes | – | Wastes water, needs pressure; leaves water very soft (NSF/ANSI 58) |
| Chlorine | Bacteria, viruses (some protozoa resist it) | Chemicals, Cryptosporidium | For tanks, Australian guidance: about 40 mL of 12.5% sodium hypochlorite per 1,000 L for a remedial dose, aiming for at least 0.5 mg/L free chlorine after 30 minutes |
- For drinking water, combine a physical barrier (filtration) with a disinfection step (UV, boiling or chlorine).
- Test new supplies at a lab: at least E. coli and coliforms, and for wells also nitrate, arsenic, lead, iron, manganese and pH. Test again after floods, bushfires or any change in taste or smell.
- After a bushfire, divert the first runoff and clean ash from the roof before reconnecting the tank.
6. Pumps, pressure and power
| Pump | Typical power | Good for |
|---|---|---|
| 12/24 V diaphragm pump (van and cabin) | 50–100 W while running | 10–20 L/min at 2–3.5 bar; vans, boats, small cabins on solar |
| Mains pressure pump with pressure switch | 400–1,000 W | Homes on tank water |
| Submersible bore pump | 750–2,200 W (often 240 V) | Wells and bores; big start-up surge (3–5×) |
| Solar direct-drive bore pump | 200–1,000 W of panels, no battery | Pumping to a header tank during the day |
| Hand pump | None | Backup for shallow wells in an outage |
- An accumulator or pressure tank stops the pump short-cycling and smooths the flow.
- A header tank on a stand or hill gives gravity pressure with no power at all. A solar pump fills it during the day.
- DC pumps need properly sized cable and a fuse; see the DC cable size calculator. Bore pumps on a generator need surge capacity; see the generator guide.
- Estimate the energy for heating water with the water heating calculator.
7. Stopping pipes and tanks freezing
- Bury supply pipes below the frost line (UK about 750 mm; much deeper in cold US states and alpine Australia).
- Insulate exposed pipes and fit self-regulating heat cable where needed (about 10–30 W per metre when on, so budget the power).
- Fit drain-down valves so you can empty pipes, pumps and filters before leaving a cabin or van in frost.
- UV units, pressure tanks and filters crack if frozen. Keep them in a heated or insulated space.
- Large tanks rarely freeze solid, but inlets, overflows and exposed pipes do.
8. Greywater and waste
- Greywater (from showers, basins and washing machines, not toilets or kitchen sinks in most rules) can water gardens if used promptly and kept away from food crops and people.
- UK: greywater reuse systems follow BS 8525 and the Water Fittings Regulations; discharging to ground may need Environment Agency (or SEPA, NRW) permission depending on volume.
- US: rules vary by state; many allow simple "laundry-to-landscape" systems without a permit, while others require permits under the plumbing code.
- Australia: state rules allow manual bucketing; diversion devices and treatment systems usually need accredited products and council approval, and greywater can't be stored untreated for more than about 24 hours.
- Composting toilets and septic systems have their own approvals; check with your council, county or local authority.
9. Water in vans and boats
- Use food-grade tanks and hoses ("drinking water safe" hose, not garden hose).
- Sanitise the tank and pipes at the start of each season with a purpose-made product or a weak chlorine solution, then flush.
- Fill from known safe taps; a carbon inline filter on the fill hose helps taste.
- Drain everything (including the water heater) before frost, or use a non-toxic RV antifreeze in the US.
- A 12 V pump draws 4–8 A only while running; size its fuse and cable like any other load. See the campervan wiring guide.
10. Emergency water at home
- Store bottled water (3 L or 1 US gallon per person per day, at least 3 days). Rotate it before the use-by date.
- Your hot water cylinder or tank holds 100–200 L of usable water if the supply fails. Turn off its power or gas first, then drain from the bottom valve.
- A water butt or rain barrel gives flushing and washing water.
- Portable filters with a certified virus rating, or boiling, make other water safe to drink.
- See the power outage plan for a full emergency checklist.
11. Maintenance and testing
| When | Task |
|---|---|
| Every 3–6 months | Clean gutters, leaf guards and first-flush diverter; check screens |
| Every 6–12 months | Replace sediment and carbon filters (or by the pressure gauge); check tank lids and seals |
| Yearly | Replace the UV lamp and clean its quartz sleeve; lab-test drinking water (more often for wells) |
| Every 2–3 years | Inspect the tank for sediment and desludge if needed |
| After floods, fires or dead animals | Test, disinfect or drain, and clean before drinking again |
12. Rules by country
| UK | USA | Australia | |
|---|---|---|---|
| Is rainwater collection legal? | Yes, freely | Yes in all states, but some limit it: Colorado allows up to 110 US gallons (two barrels) per home for outdoor use; Utah requires free registration and caps storage at 2,500 gallons; large cisterns in Oregon and Washington may need a water right | Yes, and often required for new homes (for example NSW BASIX and other state building rules) |
| Standards for rainwater systems | BS 8515 (rainwater harvesting); BS 8525 (greywater) | IPC/UPC plumbing codes (non-potable rainwater); ARCSA/ASPE 63 | AS/NZS 3500 (plumbing); enHealth guidance on rainwater tanks; AS/NZS 4766 and AS 2070 (tanks) |
| Protecting the mains supply | Water Supply (Water Fittings) Regulations 1999: rainwater is fluid category 5; mains top-up only through an air gap (type AA or AB). Notify the water company before installing; no cross-connections | Plumbing codes require an air gap or approved backflow preventer, and labelled non-potable pipework | AS/NZS 3500: backflow prevention device and a licensed plumber; labelled rainwater pipework |
| Private drinking-water supplies | Private Water Supplies Regulations (England 2016; separate rules in Wales, Scotland and NI): councils risk-assess supplies serving more than a single private home, or any commercial or rented use | Private wells are the owner's responsibility; EPA recommends yearly testing for coliforms and nitrates; state health departments set well-construction rules | Owner's responsibility; state health departments publish guidance (based on the Australian Drinking Water Guidelines) |
| Well and bore construction | Abstraction over 20 m³/day needs an Environment Agency (or equivalent) licence | State well permits and licensed drillers | State bore licences and licensed drillers |
| Treatment product standards | WRAS-approved fittings; Drinking Water Inspectorate guidance | NSF/ANSI 42, 53, 55, 58, P231 | WaterMark certification for plumbing products |
13. Frequently asked questions
Is rainwater safe to drink?
It can be, from a clean roof and a well-maintained tank, but it can carry bacteria and parasites from bird and animal droppings. Filter it and disinfect it (UV, boiling or chlorine) before drinking, and test it.
How much rainwater can I collect from my roof?
Roughly roof area in square metres × rainfall in millimetres × 0.8 litres. A 50 m² roof with 800 mm of rain a year gives about 32,000 litres a year.
Is it illegal to collect rainwater?
Not in the UK or Australia. In the US it's legal in every state, but a few (notably Colorado and Utah) limit how much you can store.
How long should I boil water to make it safe?
Bring it to a rolling boil. The US CDC advises one minute (three minutes above about 2,000 m altitude). Boiling doesn't remove chemicals or lead.
What size water pump do I need for a cabin?
For a small cabin, a 12 V diaphragm pump giving 10–20 L/min at 2–3 bar with a small pressure tank is usually enough, and uses 50–100 W only while running.
Can I connect my rainwater tank to my mains plumbing?
Only with approved backflow protection, usually an air gap, and in the UK you must notify the water company first. Never connect them directly.
14. Sources
- enHealth, guidance on the use of rainwater tanks (Australian Government): cdc.gov.au
- WRAS, alternative water systems guidance (2024): wras.co.uk
- UK legislation, Water Supply (Water Fittings) Regulations 1999: legislation.gov.uk
- Colorado State University Extension, harvesting rainwater under Colorado rules: colostate.edu
- MyRainPlan, rainwater harvesting laws by state (2026): myrainplan.com
- US CDC, how to create an emergency water supply: cdc.gov
- US EPA, private drinking water well programs in your state: epa.gov
- NSW Health, rainwater tanks: health.nsw.gov.au
- Better Health Channel (Victoria), water quality in tanks, bores and dams: betterhealth.vic.gov.au
General guidance only. Plumbing connected to a public supply must be done by a qualified plumber in line with local rules; get drinking water tested.
New to some of the terms? See the glossary. Not sure where to start? Try start here.