Finding hidden water at home
Where water is hidden, what it is safe to use for, which tap is mains-fed, the hot water cylinder, the loft tank, pipes and cisterns, when an outage is warned, and treating water.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
When the water supply fails, most homes still hold a useful amount of water: in the hot water cylinder, the cold water storage tank in the loft, the pipes, the toilet cisterns, and anything you filled when warned. Knowing where it is, how to get it out safely, and what it's safe to use for can carry a household through the first day or two of an outage. This guide covers where water is hidden, which sources are safe to drink, draining a hot water cylinder safely, the loft tank, pipes and cisterns, filling up when an outage is warned, and treating water.
1. Where water is hidden
| Source | Typical volume | Best use |
|---|---|---|
| Hot water cylinder (vented or unvented) | Often 100–250 litres | Washing; drinking after boiling |
| Cold water storage tank in the loft | Often 100–250 litres (about 250 litres is common) | Washing and flushing; drink only after boiling or treating |
| Household pipes | A few litres | Drinking (from mains-fed pipes) |
| Toilet cisterns | About 6–9 litres each | Flushing only |
| Central heating system | Tens of litres | Never for drinking or washing: contains inhibitor chemicals |
Combi boiler homes have no hot water cylinder or loft tank, so stored water matters even more. See the emergency drinking water guide.
2. What it's safe to use for
- Drinking: use stored bottled water or water from mains-fed pipes first.
- Tank and cylinder water: the Drinking Water Inspectorate advises using a mains-fed tap for drinking. In an emergency, boil stored water before drinking.
- Cistern water: flushing only.
- Heating system water: never use; it's treated with chemicals.
3. Which tap is mains-fed?
- In older homes, the kitchen cold tap is often the only mains-fed tap; others come from the loft tank.
- In newer homes with unvented systems, most taps are at mains pressure.
- The DWI's test: with the tap fully open, try to hold back the flow with your thumb. If you can, it's probably tank-fed.
4. The hot water cylinder
- Switch off the immersion heater and boiler first, so they can't heat an empty cylinder.
- Let the water cool before draining, to avoid scalds.
- For a vented cylinder fed from a loft tank, water can often be drawn from a drain valve near the bottom of the cylinder or its cold feed, using a hose. Opening a hot tap upstairs lets air in.
- Unvented (pressurised) cylinders have safety valves and controls: follow the maker's instructions or ask a plumber before draining.
- Collect into clean containers, and boil before drinking.
Refill the system and check for leaks before switching the heating back on when supply returns.
5. The loft cold water tank
- In a vented system, the loft tank keeps feeding cold taps and the cylinder until it empties.
- Check the lid is fitted and the water is clean before use.
- Boil or treat before drinking; it isn't mains water.
- Take care in the loft: use boards, a torch and a sound ladder.
6. Pipes, cisterns and the heating system
- When supply fails, turn off the stopcock to stop pipe water draining back into the mains, then open the lowest cold tap to collect what's left in the pipes.
- Don't flush toilets more than needed; each cistern holds one or two flushes.
- Never draw water from radiators or the boiler system.
7. When an outage is warned
- Fill clean bottles and containers for drinking.
- Fill the bath and buckets for flushing and washing.
- Fill kettles and saucepans.
- Your water company may provide bottled water stations, and extra help for customers on its Priority Services Register. See the no water supply guide.
8. Treating water
- Boiling is the most reliable method: bring water to a rolling boil and let it cool.
- Filters and purification tablets are useful backups. See the water filters guide.
- Store treated water in clean, covered containers. See the long-term water storage guide.
9. Frequently asked questions
Can I drink water from my hot water cylinder?
In an emergency, yes, after switching off the heating, letting it cool, collecting it cleanly and boiling it.
Is water from the loft tank safe to drink?
The Drinking Water Inspectorate advises drinking from a mains-fed tap. In an emergency, boil tank water first.
Can I use water from radiators?
No. Central heating water contains chemicals and isn't safe to drink or wash with.
10. Sources
- Drinking Water Inspectorate, water storage tanks and cisterns: dwi.gov.uk
- East Lindsey District Council, DWI leaflet: water storage tanks and cisterns: e-lindsey.gov.uk
- Louisiana GOHSEP, locating safe drinking water: la.gov
New to some of the terms? See the glossary. Not sure where to start? Try start here.