Home › Guides › Hand tool woodworking

Hand tool woodworking

Essential tools, holding the work, measuring and marking, sawing, chisels and planes, simple joints, green woodworking, finishes, and safety.

By Michael Johnson · Updated 19 November 2026 · How we check our guides

Woodworking with hand tools needs no electricity, makes little noise or dust, and lets you build and repair furniture, shelves, boxes, handles, frames and fittings anywhere. A small kit of good tools, kept sharp, will do almost any job. This guide covers the essential tools, holding the work, measuring and marking, sawing, chiselling and planing, simple joints, green woodworking, finishes (including a fire hazard many people don't know about), and safety.

Rags soaked in linseed oil and other drying oils can catch fire on their own as they dry. Lay used rags flat outdoors to dry, or put them in a sealed metal container of water, before disposal. Never leave them screwed up in a pile.

1. Essential tools

ToolUse
Panel saw (crosscut and rip, or a hardpoint general saw)Cutting boards to size
Tenon or dovetail sawAccurate joint cuts
Coping sawCurves and waste removal
Bench chisels (6, 12, 19, 25 mm)Joints, paring, cleaning up
Smoothing or jack planeFlattening and smoothing
Brace and bits or a hand drillHoles
Square, marking gauge, marking knife, tape and ruleAccurate layout
Mallet, hammer, screwdrivers, clampsAssembly
Sharpening stonesKeeping edges keen. See the sharpening guide

Good second-hand tools are often better value than cheap new ones.

2. Holding the work

3. Measuring and marking

4. Sawing

5. Chisels and planes

6. Simple joints

7. Green woodworking

8. Finishes

9. Safety

10. Frequently asked questions

What hand tools does a beginner need for woodworking?

A panel saw, tenon saw, a few bench chisels, a plane, a square, marking gauge and knife, a hand drill or brace, clamps and sharpening stones.

Why are oily rags a fire risk?

Drying oils like linseed give off heat as they cure; in a pile, that heat can build up until the rags ignite.

What is green woodworking?

Working freshly cut, unseasoned wood with hand tools such as axes, drawknives and pole lathes, which is easier to shape than dry timber.

11. Sources

  1. Make:, understanding basic woodworking tools: makezine.com
  2. Woodsmith, the basics of a hand tool shop: woodsmith.com
  3. Fine Woodworking, all about hand tool skills: finewoodworking.com
  4. Wagner Meters, a beginner's guide to hand tools for woodworking: wagnermeters.com

New to some of the terms? See the glossary. Not sure where to start? Try start here.