Home › Heating, gas & water

Firewood energy calculator

Wet wood wastes much of its heat boiling off water. Choose the species, moisture and amount to see what you'll really get from your stove.

A stacked cubic metre of split logs is roughly 65% wood, 35% air.
%
Measure on a freshly split face. Under 20% is seasoned; fresh-cut wood is 40–60%.
%
Modern stove 70–80%; older stove 50–60%; open fire 10–20%.
Leave blank if you don't want a cost.

Results

Weight of wood—
Energy in the wood—
Useful heat from your stove—
Equivalent heating oil—
Cost per kWh of heat—

How it's calculated

Dry mass = solid volume × basic density (oven-dry kg per m³) Wet mass = dry mass ÷ (1 − moisture) Heat value (MJ/kg) ≈ 18.8 × (1 − moisture) − 2.44 × moisture kWh = mass × MJ/kg ÷ 3.6

Moisture is on a wet basis (the share of the log's weight that is water), which is what most moisture meters display.

Heat per cord and per cubic metre (20% moisture)

WoodDensity (oven-dry, kg/m³)kWh per stacked m³kWh per full cordMillion BTU per cord
Oak5601,8396,79123.2
Ash5601,8396,79123.2
Beech5601,8396,79123.2
Birch5101,6756,18521.1
Sugar maple / hard maple5601,8396,79123.2
Hickory6402,1027,76126.5
Cherry5001,6426,06320.7
Red gum (Australia)7002,2998,48929.0
Ironbark (Australia)9002,95610,91437.2
Douglas fir4501,4785,45718.6
Larch4601,5115,57819.0
Pine4201,3795,09317.4
Spruce3801,2484,60815.7
Poplar / aspen3501,1504,24414.5
Willow3401,1174,12314.1

Figures are for the wood itself. Multiply by your stove's efficiency for useful heat. Densities vary within a species by 10–20%.

Seasoning times

Compare wood with other fuels in the heating fuel cost calculator, and see the wood burner guide for clean burning and smoke control rules.

Frequently asked questions

How many kWh are in a cord of wood?

A full cord of seasoned oak (20% moisture) holds roughly 6,500–7,000 kWh, about 22–24 million BTU. Softwoods like pine hold around 5,000 kWh.

How many kWh in a cubic metre of logs?

A stacked cubic metre of seasoned oak, ash or beech holds about 1,800 kWh; a loose (thrown) cubic metre about 1,250–1,300 kWh.

Does wet wood give less heat?

Yes. Wood at 50% moisture gives less than half the heat per kg of wood at 20%, and much of what's left goes up the chimney as steam and smoke.

Related calculators

Calculations and formulas last checked 8 November 2026. Spotted a problem? Tell us.

More in Heating, gas & water · all calculators