Home › Electrical basics

Extension lead load calculator

Enter the wattage of each appliance plugged into the lead (from the rating plate), the lead's rating and whether it's a cable reel. The calculator shows the total load, the current, and whether the lead is overloaded.

W
From the rating plate or manual. Kettles 2,000–3,000 W, heaters 1,000–3,000 W, TVs 50–200 W.
W
W
W
A
Most UK extension leads are 13 A; some are 10 A or less. Check the label.
V
230 V in the UK.

Results

Total load—
Current—
Share of the lead's rating—
What to do—

How it's worked out

Current (A) = total watts ÷ supply voltage Share of rating = current ÷ lead rating × 100

Typical results (230 V, 13 A lead)

AppliancesTotalCurrentResult
TV, laptop, lamp (100 + 60 + 10 W)170 W0.7 AFine
Kettle and toaster (2,200 + 900 W)3,100 W13.5 AOverloaded
Fan heater and kettle (2,000 + 2,200 W)4,200 W18.3 AOverloaded

See the extension leads safety guide and the watts to amps calculator.

Frequently asked questions

How many watts can a UK extension lead take?

A 13 A lead can supply about 3,000 W in total at 230 V, or less if it's rated lower.

Can I plug a kettle and toaster into the same extension lead?

Usually not: together they often exceed 13 A. Plug high-power appliances into wall sockets.

Why must cable reels be unwound?

A wound cable can't lose heat, so it can overheat and melt even at loads below its normal rating.

Related calculators

Calculations and formulas last checked 8 November 2026. Spotted a problem? Tell us.

More in Electrical basics · all calculators