Home › Guides › Basic blacksmithing

Basic blacksmithing

Essential kit, coal, coke or gas, setting up safely, carbon monoxide and fumes, basic techniques, heat colours, first projects, steels, and neighbours.

By Michael Johnson · Updated 19 November 2026 · How we check our guides

Basic blacksmithing lets you make and repair hooks, brackets, hinges, pokers, tool handles and simple tools from scrap steel: genuinely useful skills when replacement parts are hard to get. A small forge can be set up in a garden or workshop for modest cost. This guide covers the essential kit, coal, coke and gas forges, setting up safely, carbon monoxide and fumes, basic techniques and heat colours, first projects, steels and hardening, neighbours, and learning.

Forges produce carbon monoxide, intense heat and flying scale. Work outdoors or in a very well-ventilated space with a carbon monoxide alarm, never in a closed garage or shed. Never heat galvanised (zinc-coated) steel: the fumes cause metal fume fever and can be dangerous.

1. Essential kit

2. Coal, coke or gas

ForgeProsCons
CoalTraditional, flexible heat, good for weldingSmoky, sulphur in poor coal, fire management to learn
CokeLess smoke than coalNeeds constant air blast
Propane (gas)Clean, quick to start, easy to controlGas cylinder safety, harder to heat just one spot
CharcoalCan be home-made. See the charcoal guideBurns fast, sparks

Solid fuel forges need an air supply from a blower or bellows; a small 12 V blower can run from a battery. See the off-grid workshop guide.

3. Setting up safely

4. Carbon monoxide and fumes

5. Basic techniques

6. Heat colours

Colour (seen in shade)RoughlyUse
Dull redAround 600–700 °CLight bending
Cherry redAround 750–850 °CHardening many carbon steels
Orange to yellowAround 900–1,100 °CMain forging range
Bright yellow-white, sparkingAbove about 1,200 °CToo hot: the steel is burning

7. First projects

8. Steels, hardening and tempering

9. Neighbours and rules

10. Frequently asked questions

Is a gas or coal forge better for beginners?

A small propane forge is clean and easy to control; coal gives more flexible heat but takes more skill and is smokier.

Can I use a forge in my garage?

Only with very good ventilation, a non-flammable floor and a CO alarm. Outdoors or under an open-sided shelter is safer.

What steel should I start with?

Mild steel bar, about 10–12 mm square or round, for hooks and pokers.

11. Sources

  1. Make:, blacksmithing basics: makezine.com
  2. University of Arizona Cooperative Extension, forge and shop safety: arizona.edu
  3. Southern Ohio Forge and Anvil, coal forge vs gas forge: spaco.org

New to some of the terms? See the glossary. Not sure where to start? Try start here.